Auto Mate 5104A Bedienerhandbuch PDF herunterladen (Seite 22)

5. Exit the vehicle, close all the doors and arm the system.

6. The engine runs for the Turbo Mode runtime.

Note

Turbo Timer must be turned on and the optional dash mount-

ed push button must be installed by an authorized Directed

dealer.

Remote Start Faults

For user safety, the system must be properly conﬁgured or remote start

will not activate. The Remote Start Fault output may be caused by any

of several conﬁguration issues. Refer to the following table for the com-

mand type and parking light ﬂashes that will identify the conﬁguration

issue and solution.

Flashes * Possible Fault Solution

5 Brake on Release foot brake

6 Hood open Close hood

7 After performing Remote Start

command - MTS not enabled

After performing Timer Start or

Smart Start command

Enable MTS mode

Check all Solutions

8 Toggle Switch off Turn switch on

None Alarm is triggered Disarm or reset alarm

* Refers to the number of parking light ﬂashes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 36 37

Keine Kommentare

Auto Mate 5104A Bedienerhandbuch Seite 22